Water Heaters

Heating & Hot Water / Water Heater

Heat Pump Water Heater - HP300/200S1

Haier's Heat Pump Water Heater series was developed with household energy savings in mind. Unlike a traditional water heater, heat pump water heaters provide hot water using the heat in the air, saving on the energy consumption.

The electricity used by the system is only the electricity required for the compressor and fan to operate. Electrical resistances are inserted only if they are really necessary or if requested by the user (BOOST).

Performance (HP300S1)
COP@14°C= 3.8 (EN16147)
COP@7°C = 3.2 (EN16147)
Noise power ≤ 64 dB(A) (EN12102)
Operating temperatures: -7°C-45°C

Performance (HP200S1)
COP@14°C= 3.54 (EN16147)
COP@7°C = 3.09 (EN16147)
Noise power ≤ 64 dB(A) (EN12102)
Operating temperatures: -7°C-45°C

Features & Benefits

Installation

Ability to channel suction/flow to use ambient or outdoor air.

More hot water

The addition of a serpentine pipe at the bottom of the tank further increases surface area for improved heat exchange and efficiency.

Load detachment

Water heater control allows the operation to be inhibited in periods programmed by the user (for example, when the cost of energy is higher).

Anti-legionella function

The water is heated automatically to 65°C, every seven days, to destroy any bacteria that can form in the tank.

Auxiliary solar serpentine (only HP250CM3C model)

Serpentine for external auxiliary source (solar/boiler) to preheat water in the tank.

 

 

 

 

The Tank

Insulation:

50 mm polyurethane foam provides excellent thermal insulation and minimises heat loss on standby.

Sacrificial anode:

Two magnesium anodes protect the tank from the electrochemical corrosion caused by water.

High-quality coating:

vitrified coating capable of resisting up to 850oC protects the tank from corrosion.

Electrical resistance:

1.5kW resistances in stainless steel, high efficiency (97.9%).

Wide range of operating pressure:

The tank is subjected to impulse tests of 160000 cycles at 10 bar pressure to ensure a maximum operating pressure of 7 bar.

Water protection:

The system is certified with a protection degree of IPx4 for use in humid environments and to ensure a long life span over the years

Control Display

Auto: the heat pump has priority over operation. Electrical resistances are activated only if necessary, to bring the water in the tank to the set temperature.

Eco: allows heating and maintaining the temperature of water, within a defined period of time. If the heating is not completed during this period, it will be maintained until the set temperature is reached.

Boost: the heat pump and electrical resistances work simultaneously to bring the water to the set temperature as soon as possible.

Vacation: the heat pump does not work in the set holiday period. It lights up one day before the end of the period to prepare hot water while you are on the way home.

S1 water heater controller

Features

water heater

Heat pump water heater

How does it work?

To understand how the PdC works, just think of how a refrigerator works: it transfers the heat present inside it to the surrounding environment. The Haier water heater reverses the cycle by subtracting heat from the air to transfer it to the water.

The data shown is purely indicative and is subject to change. Buyers are advised to check the accuracy with the supplier before purchasing.

Documentation

Please select the document type in the list below to view the required documentation.

Installation Manual

Energy Label

CE Certificate